Union Pacific Testing Railroad Industry’s First Exhaust Catalyst in Los Angeles
Marks & Spencer launches £200 Million “eco-plan”; B50 Biodiesel a Component

EEStor Announces Two Key Production Milestones; 15 kWh EESU on Track for 2007

EEStor, the developer of a new high-power-density ceramic ultracapacitor (the Energy Storage Unit—EESU), has broken a long public silence and announced reaching two key production milestones. First, its automated production line has been proven to meet the requirements for precise chemical delivery, purity control, parameter control and stability.

Second, EEStor has completed the initial milestone of certifying purification, concentration, and stability of all of its key production chemicals—notably the attainment of 99.9994% purity of its barium nitrate powder.

The independent 3rd party chemical analysis was completed by Southwest Research Institute, Inc. located in San Antonio, Texas under contract with EEStor, Inc.

With these milestones completed, EEStor is now in the process of producing composition-modified barium titanate powders on its automated production line, and is moving toward completing its next major milestone of powder certification.

The company anticipates that the relative permittivity of the current powder will either meet and/or exceed 18,500, the previous level achieved when EEStor produced prototype components using it engineering level processing equipment.

The EEStor ESU is projected to offer up to 10x the energy density (volumetric and gravimetric) of lead-acid batteries at the same cost. In addition, the ESU is projected to store up to 1.5 to 2.5 times the energy of Li-Ion batteries at 12 to 25% of the cost.

According to the company’s initial patent, the EESU is based on a high-permittivity composition-modified barium titanate ceramic powder. This powder is double coated with the first coating being aluminum oxide and the second coating calcium magnesium aluminosilicate glass.

The EESU alternates multilayers of nickel electrodes and the high-permittivity powder. The resulting parallel configuration of components has the capability to store electrical energy in the range of 52 kWh, according to the document, with weight for a unit of that capacity in the range of 336 pounds (152 kg).

According to EEStor, the EESU will not degrade due to being fully discharged or recharged, and also can be rapidly charged without damaging the material or reducing its life. The cycle time to fully charge a 52 kWh EESU would be in the range of 4 to 6 minutes with sufficient cooling of the power cables and connections.

The first commercial application of the EESU is intended to be used in electric vehicles under a technology agreement with ZENN Motors Company. (Earlier post.) EEStor says that it remains on track to begin shipping production 15 kWh Electrical Energy Storage Units (EESU) to ZENN Motor Company in 2007 for use in their electric vehicles.

The production EESU for ZENN Motor Company is designed to function to specification in operating environments as severe as -20° to +65° degrees Celsius, will weigh less than 100 pounds, and will have ability to be recharged in a matter of minutes.

Resources:

Comments

BlackSun

This is a game-changing announcement. Bravo. These ultracapacitors will also have major application in smoothing out intermittent sources of power such as wind and solar. I'd hate to see one explode, though.

Patrick

I have seen electrolytic capacitors blow. I can't think of any time I've seen a blown ceramic cap.

100lbs for 15kWhrs? The tesla could be re-made and come out lighter than an Elise.

tjwen

Once you put this in the Volt GM can go into full prodution.

eric


I have seen electrolytics blow myself - we used to amuse ourselves in college by putting small electrolytics into wall sockets and then throwing the switch :-).

DS

Electrolytics caps blow up because overheated electrolyt turns into a gas and ruptures the sealed aluminum casing.
I can't imagine a ceramic would do that.

Cervus

Once charged, how long do capacitors like these stay that way? I imagine you can just plug them in at night anyway, but I'm just wondering how battery-like their behavior is.

Kevin

This is a very exiting announcement. I hope they start shipping them in volume this year. If so, I predict that we'll soon see a large number of production electric and plug-in hybrids being sold with this or other competing battery technologies. It would be nice to see the US cease its oil imports within 10 years or so.

Kevin

Oops. Meant to write "exciting announcement".

Also, I'd like to point out that a cheap, low maintenance, high density energy storage medium could be useful for far more than just cars. For instance, it could make it far more practical to implement an off-grid electrical system for a solar/wind powered home.

allen_xl_Z

_A key advantage of barium (as well as Ti, Mg, Al, Ca, SI, O, and N) is that its more abundant than lithium. The downside may be the brittleness of the ceramic, and thus the possible need for additional dampening/protection from shock.

Commenters refering to exploding capacitors,
Further down the road, we may get carbon aerogel ultracapacitors. One possible destructive use for such a material would be as an explosive. All the gaps could be filled with O2 (if it could be stabilised), or powerful oxidants. An electrical surge could be used to set it off, leaving little or no residue or explosive material unconsumed. Configured properly, it might have powerful EMP properties.

John

Kleiner Perkins Caufield & Beyers are the major investors, at the moment, in EEStor. For those who don't know, they are among the largest and most successful venture capital firms in the world. Their portfolio includes Amazon, Sun, Genetech, Verisgin, and GOOGLE, among others.

Why do I mention this? Because for once, important EV technology IS NOT IN THE HANDS OF BIG OIL.

Cue music:

"Celebrate good times, come on..."

John McConnell

The future of the world is based on better batteries -- the future is looking bright!!

bill borsheim

Just had a run-in with a died in the woolly ICE buff. He'll probably gasp upon hearing this story, then make up a song&dance how gas is great & putt putt engines don't cause global warming. As for me, I shall quit worrying about such liars, & prepare myself for the day putt putts become superfluous to my life.

cj

How do you make something like this safe to drive? In a collision all that 52kwh of energy could be released in a instant. If gasoline catches fire it's burn rate is limited to the oxygen available.
Car wrecks could become extremely dangerous. Does anyone know what the equivalent weight of TNT to make 52kwh of energy? I would bet it is allot.

yesplease

Depending on the size of the pack, I wonder if these could be put in "bomb proof" casing, kinda like the black boxes on aircraft...

allen_xl_Z

CJ, Yesplease,
Perhaps a virtually indestructible casing could be used. Probably it will made of carbon fiber, and further encased in a metal alloy box. There are other possibilities, but most are in the concept stage, or not feasible in the foreseeable future.

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name is required. Email address will not be displayed with the comment.)