Green Car Congress  
Home Topics Archives About Contact  RSS Headlines

« First Tesla Supercharger in Switzerland | Main | US DOE releases Grid Energy Storage report »

Print this post

University of Houston team demonstrates new efficient solar water-splitting catalyst for hydrogen production

16 December 2013

Researchers from the University of Houston (UH) have developed a cobalt(II) oxide (CoO) nanocrystalline catalyst that can carry out overall water splitting with a solar-to-hydrogen efficiency of around 5%. They report on their work in a paper in the journal Nature Nanotechnology.

Corresponding author Jiming Bao, an assistant professor in the Department of Electrical and Computer Engineering at UH, said photocatalytic water-splitting experiments have been tried since the 1970s, but this was the first to use cobalt oxide and the first to use neutral water under visible light at a high energy conversion efficiency without co-catalysts or sacrificial chemicals.

The project involved researchers from UH, along with those from Sam Houston State University, the Chinese Academy of Sciences, Texas State University, Carl Zeiss Microscopy LLC, and Sichuan University.

The generation of hydrogen from water using sunlight could potentially form the basis of a clean and renewable source of energy. Various water-splitting methods have been investigated previously, but the use of photocatalysts to split water into stoichiometric amounts of H2 and O2 (overall water splitting) without the use of external bias or sacrificial reagents is of particular interest because of its simplicity and potential low cost of operation.

However, despite progress in the past decade, semiconductor water-splitting photocatalysts (such as (Ga1-xZnx)(N1-xO)) do not exhibit good activity beyond 440 nm and water-splitting devices that can harvest visible light typically have a low solar-to-hydrogen efficiency of around 0.1%.

Here we show that cobalt(II) oxide (CoO) nanoparticles can carry out overall water splitting with a solar-to-hydrogen efficiency of around 5%. The photocatalysts were synthesized from non-active CoO micropowders using two distinct methods (femtosecond laser ablation and mechanical ball milling), and the CoO nanoparticles that result can decompose pure water under visible-light irradiation without any co-catalysts or sacrificial reagents. Using electrochemical impedance spectroscopy, we show that the high photocatalytic activity of the nanoparticles arises from a significant shift in the position of the band edge of the material.

—Liao et al.

Despite some differences between the two types of nanoparticles, both worked equally well.

Different sources of light were used, ranging from a laser to white light simulating the solar spectrum. Bao said he would expect the reaction to work equally well using natural sunlight.

Once the nanoparticles are added and light applied, the water separates into hydrogen and oxygen almost immediately, producing twice as much hydrogen as oxygen, as expected from the 2:1 hydrogen to oxygen ratio in H2O water molecules.

Even with an improved solar-to-hydrogen efficiency rate of around 5%, the conversion rate is still too low to be commercially viable. Bao suggested a more feasible efficiency rate would be about 10%.

Other issues also remain to be resolved, including reducing costs and extending the lifespan of cobalt oxide nanoparticles, which the researchers found became deactivated after about an hour of reaction.

The work, supported by the Welch Foundation, will lead to future research, Bao said, including the question of why cobalt oxide nanoparticles have such a short lifespan, and questions involving chemical and electronic properties of the material.


  • Longb Liao, Qiuhui Zhang, Zhihua Su, Zhongzheng Zhao, Yanan Wang, Yang Li, Xiaoxiang Lu, et al. (n.d.) (2013) “Efficient solar water-splitting using a nanocrystalline CoO photocatalyst.” Nature Nanotechnology. doi: 10.1038/nnano.2013.272

December 16, 2013 in Catalysts, Hydrogen Production, Solar | Permalink | Comments (3) | TrackBack (0)


TrackBack URL for this entry:

Listed below are links to weblogs that reference University of Houston team demonstrates new efficient solar water-splitting catalyst for hydrogen production:


I whish them best, but I expect fotovoltaic solar + electrolysis will be far more efficient, flexible , covenient and cheaper.
There is a big advantage of having photon harvesting and H2 production at different locations. In addition, I expect electrolyzer/fuelcells will be able to work in both direction, so they are fuel generators and backup powerplants in a single investment.

The electrolyzer/fuel cell can also use excess wind or nuclear power, depending on what's in excess, while the fotovoltaic electricity can also be fed to the grid when demand is high. This would increase flexibility of the grid/fuel generation very significantly.

Graphene Synthetic Fuel Catalyst Developed by University of Illinois at Chicago

At first, UIC researchers used nitrogen-doped carbon nanotubes, but after they examined the reaction more closely, they discovered it wasn’t the nitrogen facilitating the reaction, but the carbon.

The GaN-Sb alloy is the first simple, easy-to-produce material to be considered a candidate for PEC water splitting. The alloy functions as a catalyst in the PEC reaction, meaning that it is not consumed and may be reused indefinitely.

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.


Post a comment

Green Car Congress © 2017 BioAge Group, LLC. All Rights Reserved. | Home | BioAge Group