« Schaeffler demo vehicle hits 2020 CAFE targets without electrification; 15% cut in fuel consumption; 48V hybrid system for 2025 | Main | JOGMEC signs 15-year contract with ISA for seabed exploration of ferromanganese crusts; cobalt, nickel and platinum »
NAMII awarding $9M to 15 additive manufacturing projects
27 January 2014
America Makes, the National Additive Manufacturing Innovation Institute (NAMII), recently announced the awardees of its second call for additive manufacturing (AM) applied research and development projects from its members. Driven by the National Center for Defense Manufacturing and Machining (NCDMM), America Makes will provide $9 million in funding toward these 15 projects with $10.3 million in matching cost share from the awarded project teams for total funding worth $19.3 million.
Combined with the projects underway from its first project call, America Makes will soon have nearly $30 million of public and private funds invested in advancing additive manufacturing in the United States, said America Makes Director and NCDMM Vice President Ed Morris.
The Institute’s second project call, which was released on 30 August 2013, was focused on AM materials; process and equipment; qualification and certification; and knowledgebase development-each with subset focus areas. Proposals could address one or more technical topic areas, but had to address all evaluation criteria.
The 15 selected projects span a variety of AM processes and materials with near-term technical achievements that address a comprehensive set of priorities-needs, gaps, and opportunities-within the AM and 3D printing industry. The projects represent teaming within the America Makes community and beyond.
Of the 75 individual partners among the 15 selected projects, 31 are America Makes members, including four Platinum (Lead) members, 15 Gold (Full) members; and 12 Silver (Supporting) members.
Subject to the finalization of all contractual details and requirements, the 15 selected America Makes projects are as follows:
|General Electric Aviation
(Aerojet Rocketdyne; B6 Sigma, Inc.; Burke E. Porter Machinery Company; Honeywell Aerospace; Montana Tech of The University of Montana; and TechSolve, Inc.)
|In-Process Quality Assurance (IPQA) for Laser Powder Bed Production of Aerospace Components.|
This project will address the need for the development of a commercially available, platform-independent Quality Assurance technology for high-volume AM production of aerospace components, which is currently lacking within the industry. The proposed effort will be achieved through the maturation of an IPQA technology solution that leverages a development approach, incorporating multiple AM machines and multiple super alloys.
|University of Pittsburgh
(Acutec Precision Machining Inc.; Alcoa Inc.; ANSYS, Inc.; and ExOne)
|Developing Topology Optimization Tools that Enable Efficient Design of AM Cellular Structures.|
This project will develop robust software for design and optimization of AM structural designs based on cellular structures. The key innovation in this technology is the utilization of micromechanics models for capturing the effective behavior of cellular structures in finite element analysis (FEA). The results from this project will enable the AM community to optimize advanced cellular structures for the design and manufacture of lightweight and strong AM parts, impacting multiple commercial sectors.
|McGowan Institute for Regenerative Medicine at the University of Pittsburgh
(ExOne and Magnesium Elektron Powders)
|AM of Biomedical Devices from Bioresorbable Metallic Alloys for Medical Applications.|
This project will develop AM methods to convert magnesium and iron-based alloys into biomedical devices, such as bone plates, tracheal stents, and scaffolds. Biocompatibility, bioresorption, and mechanical testing will be performed on the fabricated test specimens produced by a binder jet printing shape-making approach.
(Lockheed Martin and Sciaky, Inc.)
|Refining Microstructure of AM Materials to Improve Non-Destructive Inspection (NDI).|
This project will address the need to improve the ability to ultrasonic inspect titanium alloy components for high-performance aerospace applications, which feature a complex microstructure created during the electron beam directed energy deposition and subsequent heat treatment processes, through the modification of deposition process parameters and advancement of ultrasonic inspection techniques.
|GE Global Research
(3DSim, Inc.; CDI Corporation; Honeywell Aerospace; Pan Computing LLC; Penn State University; United Technologies Research Center; and the University of Louisville)
|Development of Distortion Prediction and Compensation Methods for Metal Powder-Bed AM.|
This project will benchmark and validate physics-based thermal distortion prediction and mitigation tools for metal powder-bed AM. The goal of this project is to achieve a significant reduction in development time enabled by physics-based distortion prediction and compensation tools. It is anticipated that this project will be foundational in establishing a standard set of AM design rules, distortion mitigation practices, and associated training for the entire AM supply base.
(Lockheed Martin Missiles & Fire Control; MachMotion; TechSolve, Inc.; and US Army Benet Laboratories)
|Development of a Low-Cost Lens® Engine.|
This project will enable a broad proliferation of metal AM through the development of a modular, cost-effective “LENS® Engine” for metal laser deposition, which can be installed into virtually any modern machine tool. To reach this goal, the latest in controls, toolpath generation, and quality monitoring are to be embedded in a modular design that can be easily upgraded and maintained as part of a machine tool system.
(Applied Optimization Inc.)
|Development of Knowledgebase of Deposition Parameters for Ti-6Al-4V and IN718.|
This project will offer an efficient and reusable solution to define process parameters that result in defect-free deposition in metallic AM. The knowledgebase will consist of a matrix of permissible combinations of process parameter values that may be used in order to produce defect-free additive deposits using the LENS process. The knowledgebase will provide a process engineer the ability to select from a matrix of vetted process parameter combinations and minimize/eliminate the trial-and-error or cut-and-try approach to process development. The knowledgebase will be generated for two alloys of interest, Ti-6Al-4V and IN718.
|North Carolina State University
(Advanced Machining; CalRAM Inc.; FineLine Prototyping, Inc.; Iowa State University; John Deere; Kennametal Inc.; and Productivity Inc.)
|Automatic Finishing of Metal AM Parts to Achieve Required Tolerances & Surface Finishes.|
This project will address a critical need currently impeding the broader adoption of AM methodologies. The goal of this project is to create a system that will be able to produce a mechanical product to final geometric specification. A hybrid manufacturing system, using both additive and then subtractive processing, will be developed so that mechanical parts can be “digitally manufactured” to meet the necessary final geometric accuracy required.
(CalRAM Inc.; Concurrent Technologies Corporation; General Electric; and Robert C. Byrd Institute)
|Electron Beam Melted Ti-6Al-4V AM Demonstration and Allowables Development.|
This project will demonstrate the full-scale component fabrication of electron beam (E-Beam) AM Ti-6Al-4V titanium alloy components, the development of a complete set of materials design allowables, and validation of non-destructive evaluation (NDE) methods on full-scale E-Beam AM demonstration components. Implementation opportunities for air and space structural components, as well as propulsion system components, will also be evaluated for transition to production.
|University of Texas - El Paso
(Lockheed Martin; Northrop Grumman Corporation; rp+m, Inc.; Stratasys, Ltd.; The University of New Mexico; and Youngstown State University)
|3D Printing Multi-Functionality: AM for Aerospace Applications.|
A comprehensive manufacturing suite will be integrated into a base AM fabrication process to include 1) extrusion of a wide variety of robust thermoplastics/metals; 2) micromachining; 3) laser ablation; 4) embedding wires and fine-pitch meshes submerged within the thermoplastics; and 5) robotic component placement. Collectively, the integrated technologies will fabricate multi-material structures through the integration of multiple integrated manufacturing systems to provide multi-functional products like consumer wearable electronics, biomedical devices, and defense, space, and energy systems.
|Michigan Technological University
(Aleph Objects, Inc.; ASM International; Miller/ITW; ThermoAnalytics, Inc.; and The Timken Company)
|Metal Alloys and Novel Ultra-Low-Cost 3D Weld Printing Platform for Rapid Prototyping and Production.|
This project will focus on four interlinked tasks necessary to commercialize an ultra-low-cost 3D metal printer and develop new 3D printable alloys for it. Material development will focus on aluminum alloys, with the ultimate goal of developing a printable alloy from recycled beverage containers or cans.
|Youngstown Business Incubator
(American Foundry Society; ExOne; Humtown Products; Janney Capital Markets; the University of Northern Iowa; and Youngstown State University)
|Accelerated Adoption of AM Technology in the American Foundry Industry.|
This project team will support the transition of binder jet AM to the small business casting industry by allowing increased access to use of binder jet equipment and the development of design guidelines and process specifications.
|Carnegie Mellon University
(AMETEK Specialty Metal Products; ATI Powder Metals; CalRAM Inc.; Carpenter Powder Products Inc.; FineLine Prototyping, Inc.; Medical Modeling Corporation; North Carolina State University; Oxford Performance Materials; Pratt & Whitney; Robert C. Byrd Institute; TE Connectivity Ltd.; United Technologies Research Center; and Walter Reed National Military Medical Center)
|A Database Relating Powder Properties to Process Outcomes for Direct Metal AM.|
This project will create a first-of-its-kind database relating powder properties (e.g., mean particle diameter, particle diameter distribution, particle morphology, metrics for flowability) from various suppliers to process outcomes (e.g., powder spreadability, powder ability to be sintered, melt pool geometry, microstructure, geometric precision, and material hardness). Additionally, for at least one powder system that is not immediately useable in a direct metal machine, the project will identify process variable changes needed to make that powder system yield outcomes comparable to standard powders.
|Case Western Reserve University
(Aquilex Corporate Technology Center (AZZ, Inc.); Lincoln Electric Company; rp+m, Inc.; and RTI International Metals)
|High-Throughput Functional Material Deposition Using a Laser Hot Wire Process.|
This project will focus on the assessment of a laser-assisted, wire-based additive process developed by the Lincoln Electric Company for different high-throughput functional material deposition applications, and will benchmark it against a laser-/powder-based AM process.
|Stony Creek Labs
(Grid Logic; Michigan Economic Development Corporation; MSC; Oakland University; and Raytheon Missile Systems)
|Optimization of Parallel Consolidation Method for Industrial Additive Manufacturing.|
This project will continue development of a novel method for AM by consolidating powder at many points on a part simultaneously. Materials and process data relating to the parallel consolidation method will be captured in a knowledgebase in a format consistent with the America Makes national repository framework. The knowledgebase will be complemented by online training, workforce development, and publication initiatives to disseminate information about the project’s results and support transition to commercial adoption.
The anticipated start date of the second set of projects is early Spring 2014. America Makes will conduct a Program Management Review for members only on 18-20 March in Youngstown, Ohio. The review will include overviews of the new projects being awarded.
TrackBack URL for this entry:
Listed below are links to weblogs that reference NAMII awarding $9M to 15 additive manufacturing projects: