Green Car Congress  
Go to GCC Discussions forum About GCC Contact  RSS Subscribe Twitter headlines

« Zipcar introduces Honda Fit EV into UC Davis West Village fleet | Main | Ford Selects Nat G as newest Qualified Vehicle Modifier; factory-qualified natural gas upgrades in Texas »

Print this post

Johnson Controls invests in IHU-TUT project to combine aluminum and steel in laser-welded tailored tubes for seats

27 August 2014

Johnson Controls is investing in a German automotive research project working to combine steel and aluminum in laser-welded tailored tubes for use in seats for the first time. The result could be a 10 to 20 percent reduction in weight, which would be beneficial for fuel and emissions balance.

Tailored tubes are already used to a great extent in the large series production of vehicle seats, but in this project, they consist of steel and aluminum of various wall thicknesses. As part of the research project “Hydroforming of laser-brazed tailored hybrid tubes of a steel-aluminum blend for automotive lightweight construction” (Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau, IHU-TUT), which runs until 31 January 2016, the project partners are researching the opportunity to make use of the significant weight advantages of aluminum by combining it with steel in the hollow components.

The research team, consisting of scientists from the Institute for Integrated Production (IPH) and the Hanover Laser Center (LZH), is using laser-brazing to create a sturdy and durable weld. During the project’s 24-month duration, scientists, companies in the field of laser technology, and automotive suppliers and manufacturers will be working to optimize the production process and prepare for industrial applications such as automotive body parts, impact protection for doors and seat cross members.

The primary challenge is first connecting the steel and aluminum tube segments. The hollow components are given their final geometry by means of hydroforming. Conventional bonding processes such as welding are not suited for the connecting welds between aluminum and steel because they cannot withstand the extreme pressure from the fluid medium during the hydroforming process.

We are currently investing first and foremost in development and simulation services, and supporting the project with extensive component tests. In the next step, we will produce the components and then present a concept seat with a THT back.

—Andreas Eppinger, group vice president technology management, Johnson Controls Automotive Seating

The project, supported by the Federal Ministry for Economic Affairs and Energy as well as the Research Association for Automotive Technology (FAT), offers Johnson Controls several approaches with future potential that are to be validated in the course of the project.

For one, we could realize an enormous reduction in weight with seat backs made of hybrid tailored tubes, not only from the lighter material mix of steel and aluminum, but also from using fewer components. We are also researching the option of a direct, high-strength integration of the seat back recliner. This way we could finally do away with the additional required adjustment parts and create global production processes that are both faster and more efficient.

—Andreas Eppinger

In addition, attractive design options are opened up with the load-specific design of the seat back components. In designing its concept frame, Johnson Controls is using an optical lightweight construction with concave contours: an ultra-thin frame design with concave surfaces on the rear of the seat back will offer rear seat passengers unusually generous knee space and significantly increase package and ease of use.

August 27, 2014 in Materials, Weight reduction | Permalink | Comments (0) | TrackBack (0)

TrackBack

TrackBack URL for this entry:
http://www.typepad.com/services/trackback/6a00d8341c4fbe53ef01b8d05d9809970c

Listed below are links to weblogs that reference Johnson Controls invests in IHU-TUT project to combine aluminum and steel in laser-welded tailored tubes for seats:

Comments

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Green Car Congress © 2014 BioAge Group, LLC. All Rights Reserved. | Home | BioAge Group