Report: EU to Allow Automakers to Pool CO2 Emissions to Reach Target
Hydrogenics to Provide Hydrogen Generation System to Air Liquide Canada for BC Transit’s Hydrogen Highway

Pintle-Regulated Venturi Induction Prototype Car Delivers 48.1 MPG in EPA Certified Highway Testing

Prv
The pintle-regulated venturi concept. Click to enlarge.

Independent testing of PRV Performance’s Pintle-Regulated Venturi Induction prototype car (a Honda Civic, earlier post) delivered 48.1 mpg in the EPA highway test. Carbon dioxide emissions were 106 g/km. Testing was performed at Environmental Testing Corporation in Aurora, Colorado.

The company has worked through eight generations of prototype, installed and tested in a Honda Civic with a JDM D15B single overhead cam engine. (The JDM D15B was a 1.5-liter SOHC engine applied in the MY 1992-1995 Civics.) EPA fuel economy ratings for the 1995 1.5-liter Civic ranged from 33-41 mpg. EPA highway fuel economy rating for a current, conventional 1.8L 2008 Honda Civic with five-speed automatic is 36 mpg.

PRV induction, with fuel injection directly at a variable Venturi throat, effectively mixes fuel and air due to the high velocity and reduced pressure at the vapor-liquid contact region. Pressure is recovered in the expansion section of the Venturi, thereby reducing engine pumping losses. Fuel vaporization and homogeneous mixing with air improves the burn rate in the cylinder, delivering more complete combustion early in the ignition cycle to improve fuel efficiency.

Road tests of a Honda Civic revamped with a pintle-regulated Venturi fuel induction system demonstrate a 25% increase in highway fuel economy, a 14% increase in city fuel economy and a 15% increase in torque across the entire rpm range, according to the company.

The company will present a paper on the PRV system and the test results at the SAE World Congress in 2008.

Comments

Ron

Well, I'm not an expert like you guys but I would like to mention a few things. I tried something called CA40 that you mix at 1oz/17 gal. in my Chrysler 300M. I use to get 17 mpg city and never over 26mpg hwy. After using it for a few tankfuls I now get 20.5 city and 29 hwy using the car average MPG computer.
http://www.ca40g.com/home.php in case your interested.

Second, there are several interesting engines in development that lower emmisions and improve MPG.
http://www.ttengines.com/homeflash.html
http://www.axialvectorengine.com/
http://www.cyclonepower.com/index.html
Ron

Bob

Steam heating systems have been using a Venturi valve for a long time to introduce vacumn into the system and lower the temp needed to make steam. May be that will work in an ICE. Does anyone know if the engine temp is also down ?

The comments to this entry are closed.