Graphene-encapsulated Fe3O4 nanoparticles show high capacity and cycle life as Li-ion anode material
Williams Technology Centre in Qatar and Sainsbury’s form technology collaboration; MLC flywheel energy storage for stationary applications

ETV Motors demonstrates High5ive LMNS Li-ion batteries in RC airplane

ETV Motors, an Israel-based technology start-up focused on developing battery technology for electric vehicles, has demonstrated the ability of its high-voltage High5ive battery technology to propel a radio-controlled airplane. The High5ive battery is based on a proprietary formulation, using a lithium manganese nickel oxide spinel (LMNS) cathode developed in collaboration with the electrochemistry team at Bar Ilan University.

The battery pack that powered ETVM’s RC airplane is based on the 4.7-volt Lithium-ion spinel technology that the company’s researchers have been developing since early 2008. ETVM expects to release its first prototype cells based on this advanced formulation during 2011.

The significance of ETVM’s achievement is that a high voltage lithium-ion battery pack produced in our labs proved it can deliver substantially longer flight duration than a conventional battery pack of similar size and weight.

Radio-controlled aircraft are not cars or trucks. But as highly constrained devices that have to perform important, sometimes mission-critical, tasks they need to remain air-borne for the longest possible time. In this sense, they resemble automobiles. To meet the needs of demanding fleet owners and individual drivers, electric vehicles need to get the greatest amount of energy and power from the smallest, lightest battery pack. We feel strongly that our efforts in the aviation field are an important indicator of the relative advantages of our High5ive battery cell technology.

—ETV Motors chief executive Dror Ben David

ETVM’s High5ive 4.7V battery cells are designed to be more compact than, and have twice the driving range of, the best available competing cells. ETVM says that batteries built on the basis of High5ive cells will be less expensive to produce; will have higher energy density reaching 200-250 Wh/kg and beyond (300-350 Wh/kg at the cell level); and will be safer to use.

High voltage cathodes represent one of the major potential routes to achieve the increased energy density so important to automotive batteries, ETVM and others argue. High voltage not only increases the energy and power densities but also reduces the number of cells per battery pack. Given that EV battery packs are of high voltage (typically 300-600V), series connection of cells to achieve the required voltage is the common practice, ETVM notes. Making use of 4.7 volt cells vs. the state-of-the-art, conventional 3.2 volt or 3.7 volt cells reduces the overall number of cells by 30-45%.




Electric powered Model Airplanes (and cars) have left full-scale vehicles in their dust. I've said for years that automotive engineering has a lot to learn from the RC crowd.


Good news for future PHEVs, BEVs and spy + anti-terrorists e-crafts.

When equipped with ultra thin high efficiency solar cells, a stealth designed mini-craft could stay airborne for days or until it runs out of amo.

The next step will be to equip them with high precision laser guns to incapacitate identified terrorists without risking the live of soldiers and/or pilots. A few thousand of them could do a better job than 100,000 soldiers on the ground. They could be controlled remotely from NORAD 10,000+ miles away. Nearby aircraft carriers (or small airfields on nearby islands) could serve to reload/maintain the fleet.

Eventually, some 20+ years from now, when batteries energy density is over 1000 Wh/Kg and solar cells efficiency is over 50%, small passenger e-planes could become a reality.

By that time, extended e-range BEVS will flood the car market.

Those of us who will be around that long will see a major change in all transportation modes.

The comments to this entry are closed.