New DOT research shows drivers support connected vehicle technology, appreciate potential safety benefits
Researchers find that the global carbon pool in seagrass beds is as much as 19.9B metric tons

Johnson Controls introduces production process for lightweight door panels made of natural fibers

Johnson Controls is providing a series of innovative door panels, seat structures and instrument clusters for the new BMW 3 Series. The door panels are made using a combination of natural fibers and plastic that are 20% lighter than conventional components. The seat structures for the driver’s seat save three to four kilograms depending on the model. The instrument cluster features an Automotive Pixel Link (APIX) high-speed, point-to-point connection.

The non-visible door panel elements for the new BMW 3 Series sedan and sports wagon models are largely made of wood fiber. The natural fiber carrier is directly molded with plastic. This production method makes the door panel considerably lighter. A state-of-the-art process known as groove lamination is used to apply the fabric or leather trim on the door panel. This process involves the trim being joined in recesses, eliminating the need for an additional component and further reducing weight.

Seat structures. Four special features characterize the seat structure of the new BMW 3 Series. The use of high-strength steel means it is both stable and lightweight. The low seat back pivot point makes the seat particularly comfortable as it snugly fits the occupant’s back. The structure also offers a very finely graduated recliner to ensure the best sitting position. Adjusting motors using four-pole technology, in some cases with rare-earth magnets that have a stronger magnetic field than conventional ferrite magnets, are used in the electrically adjustable seats.

This also means they need a smaller installation space and are approximately 200 grams lighter. With up to four motors per seat, this also enables a significant weight reduction. The seat structures are modular in design. They are available with four and eight-way functionality for four and five-door models. There is also a version with an easy-entry function for two-door models.

Instrument cluster.The basic instrument cluster for the new BMW 3 Series has day and night design and not only offers high-quality analog displays and LED pilot lights but also a 2.7-inch TFT display. The instrument cluster features a bidirectional APIX high-speed point-to-point connection that facilitates robust image and control data transmission using just one interface. This technology is used in displays and stepper motors on the design circuit board to communicate with the electronics on the PCB (printed circuit board) behind it.

Data are transferred at 250 megabits per second, with the APIX technology facilitating up to 3 gigabits per second. Johnson Controls has engineered new solutions with respect to software and electromagnetic compatibility for the use of APIX.

Comments

Herm

"The natural fiber carrier is directly molded with plastic"

I believe this is called particle board :)
Wood is not a bad thing in cars, it is renewable after all.

I think its about time ALL the motors used in a car were brushless... less electrical noise, no brushes to wear out, and more efficient.. but using rare earth magnets in seat motors might be a bit extreme.

The comments to this entry are closed.