Mercedes-Benz recalling SL-Class vehicles with R-1234yf refrigerant in US; replacing with R-134a
BMW and Naturstrom parter on renewable electricity for electric vehicles

Ford displays prototype Carbon Fiber Reinforced Plastic hood

Carbon_fibre_hood_a
Prototype CFRP hood. Click to enlarge.

At the Composites Europe event in Dusseldorf, Ford Motor Company displayed a prototype carbon fiber reinforced plastic (CFRP) hood. The prototype hood weighs more than 50% less than a standard steel version.

As a result of progress made during an on-going Hightech.NRW research project involving engineers from the Ford European Research Centre, production time for an individual carbon fiber hood is fast enough to be employed on a production line—a significant step towards increased usage of lightweight materials in Ford vehicles.

Carbon fiber offers a very high strength-to-weight ratio; it is up to five times as strong as steel, twice as stiff, and one-third the weight. Ford says that advanced materials such as carbon fiber are key to it plans to reduce the weight of its cars by up to 340 kg (750 lbs) by the end of the decade.

It’s no secret that reducing a vehicle’s weight can deliver major benefits for fuel consumption, but a process for fast and affordable production of carbon fiber automotive parts in large numbers has never been available. By partnering with materials experts through the Hightech.NRW research project, Ford is working to develop a solution that supports cost efficient manufacturing of carbon fiber components.

—Inga Wehmeyer, advanced materials and processes research engineer, Ford European Research Centre

Ford has partnered with specialists from the Institute of Automotive Engineering at RWTH Aachen University, Henkel, Evonik, IKV (Institute of Plastics Processing), Composite Impulse and Toho Tenax for the course of the Hightech.NRW research project.

The project team is using a refined gap-impregnation process, which works by introducing resin to pre-formed carbon fiber textile material in a fast, stable and adaptable manner, with high quality results.

Initial testing suggests that CFRP components such as the prototype Ford Focus hood will meet Ford’s standards for stiffness, dent resistance and crash performance. The component has also performed well in pedestrian protection head-impact tests, dueto its innovative construction of a special foam core sandwiched between two layers of CFRP.

Funded by the German state of North Rhine-Westphalia, the project began in 2010 and is scheduled to continue until September 2013. Targets include:

  • Developing a cost-effective method to manufacture carbon fiber composites for body panel applications that can be incorporated into existing vehicle production processes.

  • Significantly reducing individual component production times.

  • Reducing the amount of finishing work required to acceptable standards.

  • Meeting requirements for painting.

  • At least 50% reduction in component weight.

In addition to the involvement of Ford European Research Centre in the Hightech.NRW research project, Ford is collaborating with Dow Automotive Systems to investigate new materials, design processes and manufacturing techniques. (Earlier post.) Dow Automotive Systems and Ford will focus on establishing an economical source of automotive-grade carbon fiber, as well as high-volume manufacturing methods.

There are two ways to reduce energy use in vehicles: improving the conversion efficiency of fuels to motion and reducing the amount of work that powertrains need to do. Ford is tackling the conversion problem primarily through downsizing engines with EcoBoost and electrification while mass reduction and improved aerodynamics are keys to reducing the workload.

—Paul Mascarenas, Ford chief technical officer and vice president, Research and Innovation

Comments

HarveyD

BW....yes hydro being quickly variable and available 24/7 can fill in for Wind and/or Solar intermittent sources. Secondly, all intermittent energy used effectively contributes to more water stored in the large reservoirs. Increased water pressure (from higher water level in the reservoirs) effectively increase the energy produced by water volume.

Hydro is the ideal companion for Wind and Solar.

As more adjacent Wind/Solar becomes available, more excess water becomes available and hydro facilities can be over-equipped to better manage higher peak demands.

ToppaTom

Well, this project fails to consider building mountains with lakes on top.

But it began in 2010 and is scheduled to continue until Sept. 2013 attempting to:

Develop a cost-effective method to manufacture CFRPs for body panels that fit into existing vehicle production processes.

Significantly reduce individual component production times.

Reduce the amount of required finishing work to acceptable standards.

Meet requirements for painting.

Reduce component weight by at least 50%.

Investigate new materials, design processes and manufacturing techniques.

Establishing an economical source of automotive-grade carbon fiber, as well as high-volume manufacturing methods is enough of a mountain to climb.

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name is required. Email address will not be displayed with the comment.)