Researchers in Japan propose a more efficient method to reduce radioactive waste; fast reactor system shortens the lifetime of LLFPs
A team of scientists at Tokyo Institute of Technology (Tokyo Tech) working in collaboration with Tohoku University, Tokyo City University and the Japan Atomic Energy Agency has proposed a novel, more efficient method to reduce radioactive waste.
Their approach involves converting radioactive material into short-lived nuclides by absorbing surplus neutrons in the core peripheral portion of a small fast reactor faster than they are generated in the core. The new method, published in an open-access paper in Scientific Reports, could significantly reduce the effective half-life (an indicator of the amount of time it takes to bring radioactive materials down to safe levels) of long-lived fission products (LLFPs) from hundreds of thousands of years to within a hundred years.
Long-lived fission products (LLFPs) are radioactive materials with long half-lives produced by nuclear fission.
The disposal issue concerns what to do with radioactive waste after uranium and plutonium have been recovered from spent nuclear fuel using reprocessing methods such as Plutonium Uranium Redox EXtraction (PUREX).
Although burying waste deep underground is widely viewed as the most viable option, a number of strategies are being explored to reduce the stockpile of depleted fuel. One of the most promising is the partitioning and transmutation (P&T) strategy. This involves separating fuel into minor actinides (MAs) and LLFPs followed by the transmutation of MAs and LLFPs into shorter-lived nuclides.
Minor actinides are elements synthesized in nuclear fuel other than uranium and plutonium, such as neptunium, americium and curium. Transmutation is a change induced by neutron capture that results in the conversion of LLFPs to short-lived or non-radioactive nuclides.
So far, the P&T strategy has been limited by the costly and cumbersome need to separate LLFP isotopes before they can undergo transmutation. Also, some LLFPs, owing to their small neutron capture cross sections, are not able to capture enough neutrons for effective transmutation to occur.
The new study led by Satoshi Chiba at Tokyo Tech shows that effective transmutation of LLFPs can be achieved in fast spectrum reactors without the need for isotope separation. By adding a moderator (or slowing-down material) called yttrium deuteride (YD2), the team found that LLFP transmutation efficiency increased in the radial blanket and shield regions of the reactor. The researchers say that this is due to the moderator’s ability to soften the neutron spectrum leaking from the core.
Chiba and his co-workers focused on six LLFPs: selenium-79, zirconium-93, technetium-99, palladium-107, iodine-129 and caesium-135. Calculations showed that the effective half-lives of these LLFPs could be drastically reduced so that total radiotoxicity at long cooling time domain will be efficiently reduced.
In experiments of this kind, the support ratio (that is, the ratio of the transmutation rate to the production rate) is an important indicator of transmutation efficiency. The team showed that support ratios of more than 1.0 were achieved for all six LLFPs tested, representing a significant improvement on previous findings.
Using their method, the researchers say that the 17,000 tons of LLFPs now in storage in Japan could potentially be disposed of using ten fast spectrum reactors. Their method also has the advantage of contributing to electricity generation and supporting efforts towards nuclear non-proliferation.
Satoshi Chiba, Toshio Wakabayashi, Yoshiaki Tachi, Naoyuki Takaki, Atsunori Terashima, Shin Okumura & Tadashi Yoshida (2017) “Method to Reduce Long-lived Fission Products by Nuclear Transmutations with Fast Spectrum Reactors” Scientific Reports 7, Article number: 13961 doi: 10.1038/s41598-017-14319-7