Williams Advanced Engineering provides more detail about its lightweight FW-EVX EV platform
01 March 2018
At the Low Carbon Vehicle Show in the UK in 2017, Williams Advanced Engineering unveiled the FW-EVX, an innovative lightweight EV platform concept. (Earlier post.) The concept features several innovations in battery pack design, cooling systems and lightweight structures, which have each been integrated into a single, lightweight, compact chassis that is readily scalable for C, C-D and D-segment vehicles.
Now, Williams has provided more detail about the technologies behind the FW-EVX electric vehicle platform concept.
For a typical C-segment application, the FW-EVX platform weighs just 955 kg (2,105 lbs) including all-round wishbone suspension, up to four motors, 4WD transmission, steering and a 350 kg (772 lbs), 80 kWh lithium-ion battery pack.
Williams Advanced Engineering anticipates interest from two distinct customer groups for the FW-EVX: vehicle manufacturers looking for a next-generation EV platform that brings the benefits of highly integrated design and those seeking specific areas of technology for their own platforms.
An electric vehicle constructed on the FW-EVX platform can be lighter, safer, greener and much more cost-effective. This potential performance would be greater even than a design adapted from a conventional vehicle or one assembled from individual state-of-the-art systems from technology suppliers. By designing the key systems as an integral part of an aluminum/composite vehicle chassis, we have greatly reduced many of the compromises that arise when the individual elements of an EV powertrain are sourced separately, forcing the vehicle architecture to be created around stand-alone packages.
—Paul McNamara, Technical Director at Williams Advanced Engineering
The innovative thinking by Williams Advanced Engineering includes: high-strength battery modules that contribute to the vehicle structure; inferring peak battery cell temperature to eliminate the need for individual cell temperature monitoring; using two different innovations in carbon composites to reduce weight and simplify assembly; using a bespoke inverter design to better complement the vehicle package; and improving cost, packaging and component count through tight design integration across all systems.
Multifunction chassis rails improve cooling, aerodynamics and impact protection. The bonded aluminum and carbon composite center module of the FW-EVX platform includes chassis side rails that provide controlled crush zones to increase impact absorption. The side rails also provide cooling air for the battery pack, collected through ducts at the front of the vehicle, helping to minimize both the vehicle frontal area and the aerodynamic drag normally associated with heat exchangers. The sills channel cooling air through internal radiators then direct it rearwards to create downforce via an aerodynamic diffuser.
|
The sills channel cooling air through internal radiators then direct it rearwards to create downforce via an aerodynamic diffuser. Click to enlarge. |
The required volume of cooling air has been minimized by designing the battery modules with an aluminum base plate that bolts directly to the thermally conductive vehicle floor that acts as a heat sink, taking every opportunity to deliver additional functionality from every component.
The high level of integration creates a virtuous circle where each improvement in weight and functionality leads to additional benefits. For example, the weight saving permits increased battery capacity and greater vehicle range.
—Paul McNamara
2D materials create 3D structures. The goals of lightweight and superior crashworthiness are also reflected in the novel construction of the battery module, for which Williams Advanced Engineering evolved a ground-breaking technique in composite manufacture.
We have invented a method of creating an engineered hinge embedded in a single composite preform that allows 3D structures to be created from 2D materials then folded when required, called 223, and it opens up the potential to use new types of assembly processes alongside much lower cost, more flexible logistics.
—Paul McNamara
Based on considerable experience as the battery supplier to the FIA Formula E Championship, Williams Advanced Engineering has designed the central battery module of the FW-EVX as a low, slim, ultra-stiff honeycomb of interlocking composite boxes containing the battery cells.
Using the highly-automated 223 process, each box is manufactured in sheet form, then folded and bonded to create the required shape. The resulting exo-skeleton contributes to the structural performance of the vehicle and provides enhanced safety systems, including crash protection and isolation. The individual location and securing of each cell is also a crucial part of the cell’s longevity.
Lighter wishbones using recycled composite materials. Though the FW-EVX platform is initially aimed at premium and niche vehicles, there is a strong focus at Williams Advanced Engineering on bringing weight-saving composite materials to higher volume applications.
For example, the suspension wishbones are press-formed from 80% recycled carbon composite using a new, highly automated, near-zero waste process with a cycle time of just 90 seconds. Williams calls this process RACETRAK, and the resulting parts are 40% lighter than conventional aluminum wishbones yet comparable in cost to aluminum forgings.
Displayed at JEC Worldwide. Williams Advanced Engineering will be displaying these technologies at JEC World (Paris Nord Villepinte Exhibition Centre, 6-8 March 2018), alongside the National Composite Center, Stand 6S72.
Doing what they do best pure design to warm the heart.
Posted by: Arnold | 02 March 2018 at 01:17 PM
Low Carbon Vehicle
Using carbon fiber is a nice symmetry, sequesters carbon.
Posted by: SJC | 04 March 2018 at 12:13 PM