DOE awarding $19M to 12 projects for advanced battery and electrification research to enable extreme fast charging
Pembina Institute Op-Ed calls for Canada to split from US on vehicle emissions; possible linkage with California

Robert Allan Ltd. designs new battery-electric pilot boat

Vancouver, Canada-based naval architecture firm Robert Allan Ltd. has developed a new all-electric pilot boat aimed at service applications in which the run to the ship is 5 nautical miles or less.

The RAlly 1600-E is an aluminum version of its highly successful steel predecessor. It features a fully electric twin screw drivetrain and a substantial bank of high energy density batteries that are recharged from shore power.

Bow-quarter

Twin small auxiliary generators give “get home” and range extension capability but are normally not running. Top speed is 20 knots; the environmental impact of operations as well as operating costs are significantly reduced.

This boat is suited for short run applications of 5 nautical miles (NM) or less and where there is time between jobs to recharge the batteries. Pilot boats typically run at or near top speed with the pilot on board, then loiter for some time and may return at a more efficient medium speed.

In this mixed-use scenario with a 5 NM run, the RAlly 1600-E can complete a full operation totally on batteries with 30% of nominal battery capacity to spare.

The aluminum boat has the same total weight, power, and speed as the steel prototype. The weight saved in eliminating the diesel engines and their support systems, removing the diesel fuel, and changing to an aluminum hull provides the weight budget for the new electric drive and batteries.

The propulsion motors are 500 kW 2,800 rpm permanent magnet 750 volt AC electric motors controlled by frequency convertors providing a full range of speed. The motors drive through standard ZF or Twin Disc 3:1 reverse/reduction gears to conventional shafting and 840 mm propellers.

Bow-quarter

The battery system consists of 70 modules of Spear SMAR-11N-224 units providing a capacity of 815 kWh. As required by Class they are arranged in a separate compartment which is located in the middle of the boat between the accommodations and the machinery space.

The batteries are liquid-cooled and the entire space is well-ventilated and fitted with a FirePro fire extinguishing system. The same batteries also power the boat’s normal electrical load of lighting, etc. The entire design is eligible for Class approval such a Lloyd’s, ABS, or Bureau Veritas.

Some recent RFPs issued for pilot boats have specified 65 dB or lower noise levels in the occupied spaces. This is feasible on large vessels where the power/weight is low and the accommodations are some distance away from the machinery but almost impossible in small, fast, high powered boats. However, this requirement is achievable with electric drive. The electric motors generate less noise and run smoothly compared to diesel engines.

The basic cost of the electric pilot boat will depend on where it is built and what electrical system is chosen. The added capital cost of the electrical propulsion system is offset by virtually eliminating fuel costs and greatly reduced maintenance costs. The payback period is dependent on diesel and electricity costs and number of operating hours per year.

Comments

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name is required. Email address will not be displayed with the comment.)