CATL Germany plant to provide Li-ion cells for BMW iNEXT
Bosch and Daimler: San Jose to become pilot city for automated on-demand ride-hailing service; SAE Level 4/5

Renesas 100V Half-Bridge MOSFET drivers for bidirectional controller in 12V-48V automotive hybrid powertrains

Renesas Electronics Corporation announced a new family of automotive-grade 100V, 4A half-bridge N-channel MOSFET drivers. The ISL784x4 family features three devices: the ISL78424 and ISL78444 with single tri-level PWM input for controlling both gate drivers, and the ISL78434, which has dual independent inputs that separately control the high-side and low-side drivers.

The ISL784x4 half-bridge N-MOSFET drivers complement the ISL78224 4-phase bidirectional controller, enabling it to provide up to 3kW of power and greater than 95% efficiency in 12V-48V converters used in mild hybrid vehicles. The ISL784x4 drivers are also well suited for 12V-24V bidirectional DC/DC converters, as well as other high current buck or boost applications.

The ISL784x4 drivers simplify driving high-current MOSFETs by offering independent sourcing and sinking MOSFET gate drive pins. This makes it easy for designers to use external gate resistors to tune the slew rate of the rising and falling DC/DC switch node transitions, thereby reducing electromagnetic interference (EMI).

The ISL784x4 also provide adaptive dead-time control to ensure accurate break-before-make switching operations that prevent shoot-through current that would occur if both DC/DC converter switches were allowed to close simultaneously. Additionally, the ISL78424 and ISL78434’s adaptive dead time function is able to sense at the gate of the MOSFETs, eliminating potential errors introduced by voltage drops across the external gate resistors controlling the switching node slew rate.

The ISL784x4 drivers are a great fit in high current DC/DC applications such as the 12-48V converter for 48V mild hybrids. They improve efficiency by delivering robust gate drive with 3A peak sourcing current and 4A peak sinking current.

Strong gate drive allows them to rapidly switch high current MOSFETs with large gate capacitance, which reduces switching losses. The half-bridge MOSFET drivers’ adaptive dead time control minimizes excess dead time to reduce conduction losses and further increase DC/DC conversion efficiency.

In addition, the ISL784x4 drivers offer voltage ratings that are ideal for 48V automotive systems with the switching node tolerating 70V DC and up to 86V for infrequent transients. Similarly, the high-side driver’s bootstrap node can tolerate 86V DC and up to 100V during transients.

Our new ISL784x4 half-bridge driver family is the first to combine gate-sensed adaptive dead time control with independent source/sink pins for slew-rate control.

—Akira Omichi, Vice President, Automotive System Project Management Division, Renesas Electronics Corporation

Comments

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name is required. Email address will not be displayed with the comment.)