Toyota bumping US investments up to nearly $13B over 5 years; focus on advancing electrification
UECC contracts for two battery hybrid LNG car carrier vessels

Volkswagen now using robot to fit headliner in e-Golf

The Gläserne Manufaktur in Dresden is continuing to develop into the Volkswagen Group’s primary test location for trialing innovative technologies. In conjunction with the Wolfsburg and Emden factories, the Gläserne Manufaktur is part of a “technical center” project. The primary idea is to achieve automation of complex work steps within assembly.

The special challenge is that the testing and development takes place on an ongoing basis during production of the e-Golf in the Gläserne Manufaktur. The first project at the Dresden site is a world first—the headliner for the e-Golf is now being fitted by a robot as standard. This manufacturing step will also be used in production of the ID. from the end of 2019 at Volkswagen’s Zwickau plant.

2D3FC196-21CA-4BF8-AFF1-130DE909C0FE

The headliner for the e-Golf is now being fitted by a robot as standard.

We want to achieve a 30% improvement in productivity in the Volkswagen brand factories by 2025 compared to 2018 to ensure our competitiveness in the long term and to make a decisive contribution to improving the profitability of the Volkswagen brand. To achieve this, the factories must become faster, leaner and more efficient. The various technical center projects in Wolfsburg, Emden and Dresden make an important contribution to this by testing innovative technologies.

—Dr Andreas Tostmann, member of the Board of Management for Production and Logistics of the Volkswagen brand

The Gläserne Manufaktur is the showcase for electric mobility and now also a pilot factory for the Volkswagen Group. The extraordinary aspect is that we are pushing ahead with our automation projects during production. A technology that makes it to series readiness can be used in the automotive industry worldwide. This enables us to integrate our expertise into the Group and further consolidate the profile of our site.

—Lars Dittert, site manager of the Gläserne Manufaktur

The Gläserne Manufaktur has special requirements for an automotive production facility due to its unique architecture. For example, testing for optical component detection is challenging due to the high light incidence and associated contrasts. The sensors have to work under much more difficult conditions.

The safety requirements are also above average due to the large number of visitors. An average of 400 guests visit the Gläserne Manufaktur daily. Furthermore, the small batch production of 72 e-Golfs per day is an advantage.

The cycle time per workstation in Dresden is comparatively long compared to conventional production facilities. A number of employees are therefore highly qualified to handle the larger workload at each workstation. Furthermore, the short distances between the workstations and the comparatively large work surface are an optimal environment for testing new technologies.

The innovations in Dresden are supported by Volkswagen Brand Planning and Wolfsburg plant engineering. Other projects at the Dresden site include the automated assembly and removal of the car doors and the human/robot collaboration.

Comments

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name is required. Email address will not be displayed with the comment.)