SEAT and Grupo Sesé link up via drone
Volkswagen issues new corporate environmental mission statement: “goTOzero”

Volkswagen Group Components supplying numerous components and parts for the production of the Volkswagen ID.3

Pre-series production of the ID.3 EV has already begun at the Volkswagen plant in Zwickau. The core components for electric cars are developed and produced for the new electric vehicles at the Volkswagen Group Components plants: the electric drive comes from Kassel; the Salzgitter plant supplies its colleagues in Hessen with rotors and stators. The Brunswick plant develops and produces the battery system, further sites deliver castings and other parts.

EBCBE3FC-F3CA-47A9-8EFB-D00E80D8C24E

The success of the ID.3 start-up marks a milestone for our Group. Volkswagen Group Components supplies core components for this vehicle. The shared responsibility for the success of the ID.3 start-up is at the same time a commitment and an incentive for us. We are concentrating on modifying our plants to manufacture new products for electric vehicles. Certain plants are being specialized, and at the same time we are making use of the synergies through the manufacturing of components within the Group.

—Thomas Schmall, Chairman of the Board of Management of Volkswagen Group Components

Electric drives from Kassel. The Group Components plant in Kassel supplies electric drives and platform parts for the ID.3. In addition to the dual-clutch gearbox (DSG), for which Kassel has been known since the launch of production 16 years ago, the plant will chiefly be producing electric drives for the modular electric drive matrix (MEB). All parts for the electric drive are put together at the Kassel plant, including the parts from the component plants in Salzgitter, Poznań and Hanover.

Kassel produces the electric drives for all MEB vehicles in Europe and North America. Production of pre-series drives has already started; in future, up to 500,000 units will leave the factory each year. Kassel works closely with the Chinese plant in Tianjin where the electric drive is produced in parallel for the Chinese market.

Together, the two plants will produce up to 1.4 million electric drives each year from 2023 onwards. This means that Volkswagen Group Components will be one of the largest global manufacturers of electric vehicle drives in the future.

In addition to the electric drive, load-bearing components and body parts are also produced in Kassel for the ID.3: parts of the extremely durable frame for the battery box, damper mounts, crossmembers and the tunnel. The platform parts from Kassel are then delivered to the Zwickau plant for assembly to complete the vehicle body.

Rotor and stator from Salzgitter. As part of the transformation to electric mobility, the Components plant in Salzgitter is specialized in manufacturing rotors and stators in addition to conventional engine production. In future, up to 2,000 rotors and stators will be produced each day, along with gasoline, diesel and CNG drives. In order to achieve these high volumes, a new hairpin technology developed by Volkswagen is used to manufacture stators. The technology enables improved performance figures in shorter production times.

Salzgitter also stands for the transformation process at Group Components: Volkswagen Group Components has assumed end-to-end responsibility at Volkswagen AG for the battery, starting with research and ending with the recycling process.

The Salzgitter site has taken on key elements of these processes: battery expertise is being developed at the Center of Excellence (CoE) and a pilot plant for battery production will be opened by the end of the year. This will be followed by the pilot plant for recycling in 2020. Competence and industrial processes are to be developed at both pilot plants.

Battery system from Brunswick. The battery system for the ID.3 will be manufactured at the site in Brunswick. A new hall the size of nine soccer pitches will be built especially for manufacturing the battery system. It is scheduled to open in the fourth quarter of 2019. In future, around 2,000 units will be produced per day and delivered to the vehicle production site in Zwickau.

The Brunswick site has been steadily developing its battery expertise since 2013, in relation to both complete systems and production. The battery systems manufactured there include those for current electric and hybrid vehicles by the Volkswagen brand as well as trucks for Scania and MAN.

Many years of experience and expertise have also found their way into the most recent battery system for the MEB. MEB battery systems that have already been manufactured are currently undergoing several weeks of hardness testing, and are being put through their paces. The results will be incorporated into the further development.

The Brunswick site also manufactures running gear components and assembles front and rear axles. This includes welding groups and steering systems, but also drive shafts from the running gear production site in Wolfsburg.

Comments

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name is required. Email address will not be displayed with the comment.)