Semcon developing new robotic cell with vision technology to streamline fuel cell production
Conversion of Volkswagen Emden plant for EV production underway

Rheinmetall logs €250M order for electric vacuum pumps for PHEVs

Rheinmetall Automotive AG, part of technology group Rheinmetall AG, has received a major order from an international OEM for electrical vacuum pumps. The order extends to a lifetime volume of €250 million. The components will be manufactured by Pierburg Huayu Pump Technology (PHP), a Shanghai-based joint venture company of Rheinmetall Automotive.

The ramp-up phase of production started last year. The pumps will be installed in plug-in hybrid electric vehicles (PHEV) in the Chinese plants of the customer. After lowering production volume during March and April 2020 as a result of the coronavirus outbreak, the Shanghai plant of PHP now is 100% operational and the customer demand for the pumps is nearly on schedule again.

EVP production Shanghai

EVP production in Shanghai.


The electrical vacuum pump has been developed by Pierburg in Germany, where production started in 2017 for another order of the same customer. A major advantage of electrical vacuum pumps is that they can be switched off when there is no braking maneuver, while mechanical vacuum pumps run continuously in vehicle operation even when there is no need.

Furthermore, the electrical vacuum pump is not connected to the engine oil lubrication system. The oil pump can therefore be made smaller, which in turn increases the efficiency of the drivetrain.

In hybrids, electric vacuum pumps permit driving purely electrically when the combustion engine is switched off, as full braking power assistance is retained. They also allow thecoasting operating mode, in which the engine is shut down and decoupled in order to achieve additional energy savings due to the reduced friction in the drivetrain (extended start / stop operation).

The pumps can as well be used in fully electric vehicles and even in conventional drivetrains. Especially for today’s downsized gasoline engines, the electric pumps are also useful since they always guarantee an adequate vacuum level, for example for boosting braking power.

In addition to a substantial lowering of fuel consumption and emissions, the pump shows an excellent NVH (noise, vibration and harshness) performance. Mainly in quietly running electric and hybrid vehicles, the noise level of the pump system has to be so low that it cannot be heard while driving. The pump and the integrated motor are completely in-house developments by Rheinmetall Automotive, which led to fastening solutions that enable the electric vacuum pump to be attached to body parts independent from other assemblies and without causing disturbing vibrations in the structure.

Comments

The comments to this entry are closed.