Researchers at Karlsruhe Institute of Technology (KIT) and Jilin University in Changchun/China have investigated a highly promising anode material for future high-performance batteries: lithium lanthanum titanate with a perovskite crystal structure (LLTO). As the team reported in an open-access paper in Nature Communications, LLTO can improve the energy density, power density, charging rate, safety, and cycle life of batteries without requiring a decrease of the particle size from micro to nano scale.
Schematic representation of the perovskite crystal structure of lithium lanthanum titanate. Illustration: Fei Du/Jilin University
Anodes of lithium-ion batteries consist of a current collector and an active material applied to it that stores energy in the form of chemical bonds. In most cases, graphite is used as the active material. However, negative electrodes made of graphite have a low charging rate. Moreover, they are associated with safety issues. Among the alternative active materials, lithium titanate oxide (LTO) has already been commercialized.
Anodes with LTO present a higher charging rate and are considered to be safer than those made of graphite. The drawback is that lithium-ion batteries with lithium titanate oxide tend to have a lower energy density.
The team around Professor Helmut Ehrenberg, head of the Institute for Applied Materials - Energy Storage Systems (IAM-ESS) of KIT, investigated another highly promising anode material: lithium lanthanum titanate with a perovskite crystal structure (LLTO).
According to the study, which was carried out in collaboration with scientists from Jilin University in Changchun (China) and other research institutes in China and Singapore, LLTO anodes have a lower electrode potential compared to commercialized LTO anodes, which allows for a higher cell voltage and a higher capacity.
Cell voltage and storage capacity ultimately determine the energy density of a battery. In the future, LLTO anodes might be used to build particularly safe high-performance cells with a long cycle life.—Helmut Ehrenberg
The study contributes to the work of the research platform for electrochemical storage, CELEST (Center for Electrochemical Energy Storage Ulm & Karlsruhe), one of the largest battery research platforms worldwide, which also includes the POLiS excellence cluster.
Besides energy density, power density, safety and cycle life, the charging rate is another determining factor for the suitability of a battery for demanding applications. In principle, the maximum discharge current and the minimum charging time depend on the ion and electron transport both within the solid body and at the interfaces between the electrode and electrolyte materials.
To improve the charging rate, it is common practice to reduce the particle size of the electrode material from micro to nano scale. The study shows that even particles of a few micrometers in size in LLTOs with a perovskite structure feature a higher power density and a better charging rate than LTO nanoparticles.
The research team attributes this to the pseudocapacitance of LLTO: Not only are individual electrons attached to this anode material, but also charged ions, which are bound by weak forces and can reversibly transfer charges to the anode.
Thanks to the larger particles, LLTO basically enables simpler and more cost-effective electrode manufacturing processes.—Helmut Ehrenberg
Lu Zhang, Xiaohua Zhang, Guiying Tian, Qinghua Zhang, Michael Knapp, Helmut Ehrenberg, Gang Chen, Zexiang Shen, Guochun Yang, Lin Gu & Fei Du (2020) “Lithium lanthanum titanate perovskite as an anode for lithium ion batteries.” Nature Communications doi: 10.1038/s41467-020-17233-1