Stable boron-copper catalyst for CO2 conversion; stabilization with zinc
28 March 2021
A new boron-copper catalyst for the conversion of carbon dioxide (CO2) into chemicals or fuels has been developed by researchers at Ruhr-Universität Bochum and the University of Duisburg-Essen. They optimized already available copper catalysts to improve their selectivity and long-term stability.
The results are described by the team led by Dr. Yanfang Song and Professor Wolfgang Schuhmann of the Bochum Center for Electrochemistry with the team led by Professor Corina Andronescu of the Duisburg-Essen Technical Chemistry III group in an open-access paper in the journal Angewandte Chemie.
CO2 can be converted into larger carbon compounds that can be used as base chemicals for industry or as fuels. Researchers are pursuing the idea of converting CO2 electrochemically with the help of renewable energies. This would not only create useful products, but would also serve as storage for renewable energies. Copper has already emerged as a promising catalyst in previous studies, but it must be in the form of a partially positively charged ion—precisely the problem.
Under conventional reaction conditions, copper is rapidly converted from its positively charged form to the neutral state, which is unfavorable for the formation of products with more than two carbon atoms and thus deactivates the catalyst.
The team from Bochum and Duisburg-Essen modified a copper catalyst with boron. The researchers tested different copper-boron ratios and determined the optimal composition to favor the formation of compounds with more than two carbon atoms. They also showed that the boron-copper catalyst can be operated at current densities that would be required on an industrial scale.
They implemented the system in the form of a gas diffusion electrode (GDE) in which a solid catalyst catalyzes the electrochemical reaction between the liquid and gaseous phases. It is important that sufficient CO2 dissolves in the boundary region between the gas and liquid phases. The scientists succeeded in doing this by using a special binder.
Another challenge is to keep the system stable over a long period of time. For example, corrosion of the electrodes must be prevented. To this end, the chemists integrated a so-called sacrificial anode made of zinc into the system. Since zinc is a less noble metal than copper, this is corroded first, while the copper is spared.
The combination of a selective and active catalyst material in a gas diffusion electrode and the addition of the stabilizing zinc is an important step towards the use of CO2 for the synthesis of base chemicals.
—Wolfgang Schuhmann
Resources
Yanfang Song, João R. C. Junqueira, Nivedita Sikdar, Denis Öhl, Stefan Dieckhöfer, Thomas Quast, Sabine Seisel, Justus Masa, Corina Andronescu, Wolfgang Schuhmann (2021) “B-Cu-Zn Gas Diffusion Electrodes for CO2 Electroreduction to C2+ Products at High Current Densities,” Angewandte Chemie International Edition, doi: 10.1002/anie.202016898
Comments