Wolfspeed and ZF partner for future SiC semiconductor devices; new R&D center, new 200mm fab
Arctic-ready version of Nissan Ariya EV unveiled for Pole to Pole expedition

First cell coating line for battery modules goes on stream at BMW Group Plant Leipzig

BMW Group Plant Leipzig’s first cell coating line has gone into series operation as e-component production at the site continues to gain momentum. By 2024 the two existing module assembly lines will be complemented by a third, as well as four more cell coating lines and two more high-voltage battery assembly lines. The four coating lines will enter series operation during the course of this year at roughly two-month intervals.

From 2024 our plant here in Leipzig will be able to run the entire process chain for high-voltage battery production.

—Markus Fallböhmer, head of Battery Production at the BMW Group

To meet its goal of fully electric vehicles accounting for at least half of all sales by 2030, the BMW Group is investing more than €800 million to establish and develop e-component production at BMW Plant Leipzig.

Covering 2,300 m2, the new cell coating system at the BMW plant in Leipzig is located in the former production hall of the BMW i3, where production was phased out in the summer of last year. Straight afterwards the space was converted for e-component manufacturing in less than six months, and associates underwent the relevant training.

The new coating line can handle more than 10 million cells a year, or more than 2,300 an hour. The coated cells are then used on the battery module production line in Leipzig, to make modules for the fully electric BMW i4 and BMW iX1. A further line at the facility is producing battery modules for the BMW iX.

From cell coating to high-voltage battery. High-voltage battery production happens in three stages: cell coating, module production and assembly of the battery itself. The processes are highly automated.

The BMW Group sources its cells from partners who manufacture them exactly to specification. The type that is used depends on the vehicle concerned and is chosen to ensure the best possible characteristics.


Battery cell coating at BMW Group Plant Leipzig. Uncoated cells are separated.

Coating lithium-ion cells consists first of pre-treating and patterning their surfaces with a laser. This involves the laser beam “chiseling” a texture into the outside of the uncoated cell to increase its surface area and reduce the surface tension of the aluminum casing.

Next, the cells are plasma-cleansed to remove any dirt particles and oxides. Together, these two processes improve the adhesiveness of the surface, ready for the coating to be applied.

The coating is administered by a specially developed machine that coats the cells in two layers, which are then hardened by UV and offer the best possible insulation for the cells. Finally, a fully automated three-stage quality control process is carried out in which the thickness and surface quality of the coating are inspected. A high-voltage test is conducted to ensure the coating is completely free from defects.


The coating is applied.

The cell coating used at the BMW Group is blue, which was deliberately chosen for its important role in the positioning of electric BMW i vehicles and as the signal color of the range.


Coated cells.

Once coated, the battery cells are assembled into larger units known as modules. When completed, these are fitted into a aluminum housing along with the control and cooling units and the connectors that will connect them to the vehicle. The size and shape of the housing and the number of modules inside depends on the vehicle variant.

The continued expansion of Plant Leipzig is very much driven by e-component production, which will take up some 150,000 m2 of manufacturing space in the future.

The next great milestone for Plant Leipzig will be production of the MINI Countryman successor, which will roll off the production lines from the end of this year. The crossover will be available with a choice of combustion engines or a fully electric drive—powered by high-voltage batteries made in Leipzig.

Within the BMW Group production network, Plant Leipzig is a pioneer in electromobility, having produced the company’s first fully electric model, the BMW i3, from 2013 to 2022.


The comments to this entry are closed.